Methods to Remove Rust Stains from Toilets

Nearly all of us want our toilets to be squeaky clean and free of any type of stains. However, we all know that it is not possible. No matter how much care we do to keep our toilets clean, they still manage to develop those nasty-looking stains. Out of all these stains, rust stains are the most common ones.

These orange, nasty rust stains are difficult to clean. They cannot be cleared through the use of regular toilet cleaners. They require special methods and products to get rid of them.

Causes of Rust Stains

When iron and oxygen react with moisture, iron oxide is formed which is the main cause of rust formation on uncoated metal surfaces. This is the reason you see rust stains on your sink shelf when you place your shaving can there or leave your razor there. The rust stains you find on toilet bowls, tub drains, or sink drains are caused by hard water. You need to contact an expert with minimum 2 years of experience in drain cleaning services.

The hard water contains iron particles and iron bacteria that make the water hard. Iron particles and bacteria in hard water keep on sticking to porcelain and after prolonged use of hard water; an orange layer is formed that is called a rust stain. The stains caused by hard water will return after cleaning if you do not get your water treated or use water-softening products.

How Often Rust Cleaning is needed?

It is recommended that you pay more focus to rust-prone areas while doing a weekly thorough cleaning of your bathroom and toilet. It is also suggested that you keep your tubs, sinks, and toilet bowl dry to prevent rust from forming on the surfaces of these bathroom fixtures.

Methods to Remove Rust Stains

There are many methods that can be used to remove rust stains from your toilets. Some of these methods are given below for your help.

1.     Use Citric Acid

Citric acid is found in great amounts in lemon, lime, grapefruit, etc. It can also be bought in powder form from any grocery store or local drugstore. Follow the below steps to perform this method.

·         If you are using lime or lemon directly instead of citric acid powder, then you will need salt or baking soda as well.

·         First cut the lemon or lime in two halves. Now dip the half portion in salt or baking soda.

·         After you have got enough salt or baking soda on the lemon half, now start scrubbing on the affected area. After some time, you will observe that the stain will start to dim.

·         If you are dealing with a heavy stain, then you should make a paste of lemon and baking soda. Apply the paste to the affected area and cover it with plastic wrap.

·         Let this mixture rest for about an hour so that the rust particles will start to break down.

·         If you are using citric acid powder, then mix it with water to make a paste.

·         Apply the paste on the affected area and scrub it with the help of a toothbrush.

2.     Try Distilled White Vinegar

Distilled white vinegar contains acetic acid. This acid is very helpful in removing rust stains. It is recommended to use once a week to help keep the surfaces free of rust stains. You can use either food-grade vinegar or cleaning vinegar that has a higher value of acidity to help remove tough rust stains. Follow the below steps for this method.

·         Take vinegar in a spray bottle.

·         Spray the vinegar on the affected areas and start scrubbing it with a scrubbing brush.

·         This method is recommended to use once a week to help keep the surfaces rust-free.

·          For the cleaning of the toilet bowl, add 2 cups of vinegar to the bowl.

·         Then start scrubbing with the help of a toilet brush.

·         For tough stains, you have to empty the toilet bowl.

·         Pour 2 cups of distilled vinegar into the toilet bowl for at least 2 hours.

·         Scrub with the help of a toilet brush and rinse with fresh water.

3.     Use Cream of Tartar

A cream of tartar is also known as potassium bitartrate. It is the powdered form of tartaric acid. It is mostly used in baked goods. You will be surprised to know that it is a great rust remover. Follow the below steps for this method.

·         Sprinkle a generous amount of tartaric acid on the affected area.

·         Sprinkle some water on the powder to form a paste.

·         Now take a brush with nylon bristles and start scrubbing.

·         Now leave the paste on the affected area for some time and it is suggested to cover it with plastic wrap to work effectively.

4.     Try Gentle Abrasives

Baking soda, pumice powder, and table salt are all examples of gentle abrasives. They are found to be very helpful in removing rust stains from toilets. These can be used alone or can also be used with acid cleaners. Follow the below steps to apply this method.

·         First moist the stained area with water or acid cleaner.

·         Sprinkle some amount of gentle abrasive on the moist area.

·         Let the mixture rest for some time.

·         Finally scrub it away with the help of a brush with soft bristles.

5.     Commercial Rust Removers

There are many commercial rust removers available in the market. However, the drawback is that most of them contain harsh chemicals that can be very tough on your bathroom fixtures. That is why the labels read carefully before applying any commercial rust cleaner.

Read Also: UWatchfree

Final Words

Whenever you encounter a rusty toilet, do not panic. Try the above-mentioned methods or hire a local plumber to do these jobs. We are very sure that one of the above methods will help you to get rid of those nasty rust stains from your toilet. 

Leave a Reply

Your email address will not be published.